REASONS YOUR HOT WATER HEATER ISN'T WORKING

Reasons Your Hot Water Heater Isn't Working

Reasons Your Hot Water Heater Isn't Working

Blog Article

Details

What are your thoughts with regards to How to Troubleshoot and Repair an Electric Water Heater?



Lots of modern houses utilize an electrical water heater for their furnace, because of its convenience and also simplicity of use. Nonetheless, much like any other electric home appliances, troubles may emerge with its usage, unexpectedly. It can be truly frustrating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm sufficient or even too warm. Whatever the case may be, hot water heater problems can be rather aggravating. Thankfully, we've made a listing of feasible solutions to your water heater problems. There are a number of variables that could trigger most of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the problem is, getting it repaired must not pose too much of a problem if you comply with these actions:

Check Your Power Supply:


As basic as this may appear, it is really needed. Without adequate power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, merely transform it on and off again. Replace any damaged or damaged fuse. Check the device with power after these adjustments to see if it's now working.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power issue, after that attempt looking into your burner if it is still working. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that check whether the hot water is back on.

Check Your Thermostat:


If your water heater still isn't working or the water coming out isn't hot enough, you may require to examine the temperature level setups on your top thermostat. Make certain the breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This should help heat the water. Transform the breaker back on and also examine if the issue has been resolved.

Call A Professional:


If after changing all damaged components as well as resetting your temperature, the hot water heater still isn't functioning, you might require to get in touch with an expert plumber for a professional opinion. The trouble with your heating system could be that the cold and hot taps have been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the situation may be, a professional plumber would certainly aid fix the problem.

Conclusion


Hot water heater issues are not always major. Most of them result from minor issues like a blown fuse or damaged burner. Replacing the damaged components should suffice. Nevertheless, if you are still unable to solve the trouble, give a call to your closest plumber to come to get it dealt with.

What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    No Hot Water — Water Heater Repair

    As an avid person who reads on What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that excerpt was smart. Enjoyed reading our piece? Please share it. Let another person locate it. We thank you for reading our article about What Would Cause My Electric Water Heater to Stop Working?.




    Schedule Now!

    Report this page